Heat Recovery Systems


R2 - Series


The R2-Series simultaneously cools and heats different zones within a building to provide energy-saving heat-recovery operation through the use of the BC Controller.

  • Supports up to 50 indoor units
  • Available in both 208/230V and 460V up to 30 tons for various applications
  • Cool one zone while heating another
  • Set up zones to maximize simultaneous operation
  • INVERTER-driven compressor for outstanding performance and optimized energy usage
  • Uses a two-pipe system for increased installation savings
  • Maximum pipe length: 2,624 feet
Model Specifications
Compressor Operating Range 15% to 100%
Type x Quantity Inverter scroll hermetic compressor x 1
Lubricant MEL32
Starting method Inverter
Power Source Voltage, Phase, Cycle 208 / 230V, 3-Phase, 60Hz
Cooling Capacity (Nominal) 120000 Btu/h (35.2 kW) *1
Power Input (Nominal) 9.44 kW *1
Heating Capacity (Nominal) 135000 Btu/h (37.8 kW) *1
Power Input (Nominal) 10.86 kW *1
Minimum Circuit Ampacity MCA 45 / 42 Ampere
Maximum fuse size (time delay) MOCP 60 Ampere
Recommended Fuse/Breaker Size 50 Ampere
Refrigerant Type R410A x 26 lbs + 1 oz (11.8 kg)
Fan Airflow Rate 11300 CFM (320 m³/min)
Type x Quantity Propeller fan x 2
Control, Driving mechanism Inverter-control, Brushless DC motor
External Static Pressure 0.12 or 0.24"WG external static pressure; factory set to 0"WG
Sound Pressure Level (measured in anechoic room) 60 dB(A)
Dimensions H x W x D Height 64-31/32 Inches (1650 mm)
Width 68-29/32 Inches (1750 mm)
Depth 29-5/32 Inches (740 mm)
Indoor unit connectable Total capacity 50~150% of outdoor unit capacity
Model (Quantity) P06~P96/1~30
Piping Diameter Liquid (High Pressure) From Twinning Kit to Indoor Units (Brazed) 3/4 Inch (19.05 mm) Brazed
Piping Diameter Gas (Low Pressure) From Twinning Kit to Indoor Units (Brazed) 1-1/8 Inches (28.58 mm) Brazed
Operating Temperature Range Cooling (Outdoor) D.B. 23~115° F (-5~46° C) **
Heating (Outdoor) W.B. -4~60° F (-20~15.5° C)
External Finish Pre-coated galvanized steel sheet
Max. Total Refrigerant Line Length 1969 Ft. (600 m)
Max. Refrigerant Line Length (Between ODU & IDU) 541 Ft. (165 m)
Max. Control Wiring Length 1650 Ft. (503 m)
Heat Exchanger Salt-resistant cross fin & copper tube
Protection Device High Pressure Protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter Circuit (Comp. / Fan) Over-current protection
Fan Motor Thermal switch
AHRI Ratings EER (Ducted/Non-Ducted) 11.7 / 12.2
IEER (Ducted/Non-Ducted) 18.6 / 20.8
COP (Ducted/Non-Ducted) 3.45 / 3.61
SCHE (Ducted/Non-Ducted) 16.8 / 19.7
Product Documents
/* */