Heat Pump Systems

CITY MULTI VRF Heat Pumps - Outdoor Units

Y-Series H2i™

Overview

The H2i™ series improves on the Y-Series by providing full heating capacity at 0° F outdoor ambient. Hyper-Heating INVERTER (H2i™) technology is exclusively from Mitsubishi Electric and is available in select CITY MULTI® VRF models.

  • Cools or heats up to 41 individual zones
  • Available sizes: 6-16 tons
  • Available in both 208/230V
  • Provides full heating capacity at 0° F outdoor ambient
  • Provides 85% heating capacity at -13° F
  • Uses T-branches and headers to provide piping design flexibility
  • INVERTER-driven compressor for outstanding performance and optimized energy usage
  • Maximum pipe length: 984 feet
  • External finish: Pre-coated galvanized-steel with thermoset polyester-resin
Model Specifications
Power Source Voltage, Phase, Cycle 208 / 230V, 3 phase, 60Hz
Cooling Capacity (Nominal) 144000 Btu/h (42.3 kW) *1
Power Input (Nominal) 11.54 kW *1
Current Input (Nominal) 35.5 / 32.1 Ampere *1
Heating Capacity (Nominal) 160000 Btu/h (46.9 kW) *1
Power Input (Nominal) 12.65 kW *1
Current Input (Nominal) 39.0 / 35.2 Ampere *1
Refrigerant Type R410A
Compressor Type x Quantity Inverter scroll hermetic compressor x 1
Crankcase Heater 0.045(230 V)
Lubricant MEL32
Starting method Inverter
Motor Output 5.3 kW
Fan Airflow Rate 6180 CFM (175 m³/min)
Type x Quantity Propeller fan x 1
Motor output 0.92 kW
Driving mechanism Inverter-control, Direct-driven by motor
External Static Pressure 0 in.WG (0 Pa)
Sound Pressure Level (measured in anechoic room) 59 dB(A)
Dimensions H x W x D Height 64-31/32 Inches (1650 mm) / 64-31/32 Inches (1650 mm)
Width 36-1/4 Inches (939 mm) / 36-1/4 Inches (939 mm)
Depth 29-15/16 Inches (760 mm) / 29-15/16 Inches (760 mm)
Indoor unit connectable Total capacity 50~130 % of outdoor unit capacity
Model (Quantity) P06 - P96 / 1 to 31
Refrigerant Pipe Dimensions Liquid (High Pressure) 5/8 Inch (15.88 mm) Brazed
Gas (Low Pressure) 1-1/8 Inches (28.58 mm) Brazed
Operating Temperature Range Cooling (Outdoor) 23~109° F (-5~43° C) D.B. **
Heating (Outdoor) -13~60° F (-25~15.5° C) W.B.
Operating Environment - Minimum Cooling (Outdoor) 23~109°F(-5~43°C) D.B.
Pipe between unit and distributor Liquid (High Pressure) 1/2 Inch (12.7 mm) Brazed
Gas (Low Pressure mm) 3/4 Inches (19.05 mm) Brazed
Protection Device High Pressure Protection High pressure sensor, High pressure switch at 4.15MPa (601 psi)
Inverter circuit (COMP. / FAN) Over-heat protection,Over-current protection
Compressor Over-heat protection
External Finish Pre-coated galvanized steel sheet (+powder coating for -BS type)
Heat Exchanger Salt-resistant cross fin & copper tube
Product Documents
/* */